our mission:

Accelerating the World’s Transition to Fusion Energy

A viable pathway to commercial fusion with the ability to generate massive revenue through nuclear effects testing along the way.

The Honorable Lisa Gordon-Hagerty
Former Administrator of the US National Nuclear Security Administration (NNSA)

As the US Air Force and Space Force optimize for global competition, Fuse is exactly what they need to increase resiliency.

Aaron Prupas
USAF Major General (ret), Director of Defense Intelligence in the Office of the Secretary of Defense

Fuse has demonstrated the ability to control module triggering and control pulse shaping, with experimental results correlating with simulated results with over 99% accuracy. That the team went from initial design to physical testing with these results in less than 18-months is impressive.

Dr. Rick Spielman
Former Chief Scientist of the Z machine​

As seen on:

watch

TITAN FIRING TIME LAPSE

our approach: maglif

In 2018 and then further in 2022, Sandia National Lab demonstrated the feasibility of Magnetized-Liner inertial fusion (MagLIF) for fusion engineering breakeven. What’s holding us back? Repetition rate and cost. That’s why Fuse is obsessively focused on engineering efficiency and affordability. MagLIF integrates proven fusion technologies.

Path to power plant

From shot frequency and debris management to steep costs and system complexity – big challenges remain. But we're undeterred. Our tested, iterative approach breaks down tough challenges into solvable objectives – it's how we've delivered two neutron-producing fusion generators and the world's first IMG pulser in less than three years, on time and on a lean budget.
Oil Enclosure
17 Bricks Per Stage
De-ionized Water
TITAN
1 TW
90% energy efficient
TITAN
2024

Demonstrate

TITAN is a 1 TW Impedance-Matched Marx Generator – the essential MagLIF pulser building block.

Transmission Line
IMG Modules × 16
Target
TITAN
1 TW
90% energy efficient
Z-STAR
2027

Scale

Z-Star is a 15 TW MagLIF generator built to iterate on and solve system engineering challenges.

Target
Transmission Line
IMG Modules × 90
Fusion Chamber
TITAN
1 TW
90% energy efficient
APEIRON-I
203x

Deploy

Once we’ve mastered our pulser at scale, we’ll bring a MagLIF plant core to life.

TITAN
1 TW
90% energy efficient
TITAN – 2023

Demonstrate

TITAN is a 1TW Impedance Matched Marx Generator – the essential MagLIF building block.

TITAN
1 TW
90% energy efficient
Z-STAR – 2025

Scale

Z-Star is a 15 TW MagLIF generator built to iterate on and solve system engineering challenges.

TITAN
1 TW
90% energy efficient
APEIRON-I – 202X

Deploy

Once we’ve mastered our next-gen driver at micro-scale, we’ll bring a MagLIF hybrid plant core to life.

Driven by Results

18
Patents
100+
Years of fusion engineering experience
4 Months
From concept to operation of FAETON I
8 Months
From concept to first shot of the world’s first IMG: TITAN
1+ Trillion
Neutrons we can generate
with FAETON I

Progress to date

The Quest for commercial fusion energy is a decades-long, capital-intensive mission. We choose time bound objectives to de-risk our path. So far, we've delivered – swiftly, cost-effectively, and consistently. And we're just getting started.
August 2024
Air Force Phase 2 SBIR awarded

Fuse wins Air Force SBIR phase 2 contract to prototype lower cost nuclear effects testing

August 2024
San Leandro HQ opened

New San Leandro headquarters opened

July 2024
peer-reviewed paper published

Experimental results peer-reviewed in Nature Scientific Reports

April 2024
Completed 100 shots on TITAN

TITAN proves its repetitive firing capability

February 2024
Air Force Phase 1 SBIR awarded

Fuse wins Air Force SBIR contract to prototype lower cost nuclear effects testing

october 2023
TITAN phase 1 firing

Successfully tested parallel triggering on 6 stages of TITAN.

July 2023
TITAN STAGE 1 TESTING

Successfully tested parallel triggering on one stage of TITAN.

MAY 2023
CNSC license updated for higher neutron yield

License renewed by Canadian Nuclear Safety Commission (CNSC) to produce a much higher neutron yield over 1013/year by the FAETON I generator.

march 2023
BRICK | 150nH RECORD LOW INDUCTANCE

Building block of TITAN, the brick, tested and reached inductance as low as 150nH. Lower inductance means faster pulse.

Oct 2022
FAETON I | 120 kV - 1.2 MA GENERATOR

Built and operated second generator in less than three years, the only dense plasma focus device of its kind built by a private company.

Sept 2022
CNSC license to operate

The Canadian Nuclear Safety Commission (CNSC) gave us an official license to operate, making us the first private company in Canada to have one.

Jun 2022
3,000th shot fired

Within months of building MU, we succeeded in firing 3,000 ‘shots’ – a necessary speed that's unmatched in this kind of experimentation.

Dec 2021
Magical Unicorn (MU)

Designed, built, and operated our first fusion generator, outputting 0.5 MA and successfully generating neutrons.

DEC 2019
FIRST PLASMA

Created our first plasma – without breaking the bank

Jan 2019
Built Canadian facility

Converted an old carpet factory into a fusion facility

GET IN TOUCH

Reporter with questions? Future fuser/intern seeking a mission to join? Need to satisfy an insatiable curiosity?
Email us